HomeRefurbers

Kitchen cabinets

« back to Home Decorating & Design forum

Topic by percy posted 02-04-2011 08:04 AM 3029 views 0 times favorited 8 replies Add to Favorites Watch
View percy's profile

percy

1 post in 2750 days

02-04-2011 08:04 AM

I am about to build raised panel cabinet doors and drawer fronts for our kitchen. We want to stain them a deep cherry colour. What is the best method to use after the final staining to protect the finish?
Percy



View rrdesigns's profile

rrdesigns

100 posts in 3190 days

02-05-2011 07:57 AM

Polyurethane, either sprayed, brushed or hand rubbed. Make sure the stain is completely cured before sealing.

-- Beth, Oklahoma, Rambling Road Designs

View crescentharbor's profile

crescentharbor

5 posts in 2730 days

02-24-2011 09:32 AM

Lights are an integral part of your kitchen, as it is a place of constant activity and work. Also, since it is a common public area of the house, decorative lighting should be present here as well.

After finish all work den must be decorate your kitchen’s with lights.To start making plans about lights to install in your kitchen, you should first set up a budget. It is always good to know beforehand, as to how much you can afford on lighting your kitchen. This includes the cost of fixtures, cords, wires, lamps, bulbs, fitting charges etc. Then, plan a design to light up your kitchen. Each fixture should be placed at an appropriate distance. Also, make sure that no area is left dark and no place of the kitchen should be glaring with lights. One important factor to consider here is the area of the kitchen. Its dimensions and counters would play a deciding role in your kitchen lighting plan. Seek advice of an interior decorator or an architect if you are not sure about how to design this plan.

Thank you all…..............................................................

View Earlextech's profile

Earlextech

8 posts in 2770 days

02-24-2011 05:27 PM

Raised panel doors are difficult to finish with a brush or a rag. The best finish will come from spraying. HVLP is the correct system for this because of low over-spray and high efficiency of paint transfer, using a 1.5mm needle. Poly or lacquer, either oil or water based would be good choices for your top coat. Apply multiple coats.

-- Sam Hamory - The project isn't finished until it's "finished"!

View branover's profile

branover

4 posts in 2941 days

04-06-2011 08:22 PM

i know the headache that comes with kithcen cabinets. my wife just made me re-do ours and it was hectic for over 2 weeks!

SEO Los Angeles

View davbec's profile

davbec

2 posts in 2627 days

06-07-2011 01:03 AM

If you use Polyurethane as described above, after you get a clear coat or two look for some gel Polyurethane and thin a nice complimentary color. Not too thick; almost to where you dont even see it. It will help even out the stain and give the finish a richer feel. ;)

View dfletcher's profile

dfletcher

128 posts in 3141 days

06-08-2011 12:49 AM

I have been using spar polyurethane a lot and I wonder if this would be good for a kitchen cabinet finish, especially around the sink, where things drip.

View evalyn's profile

evalyn

4 posts in 1958 days

04-06-2013 07:26 AM

This is very nice, Kitchen is the most important part of the house. so that you should have to renovate this every month .

-- http://www.houston-airconditioners.net

View kenwilcox's profile

kenwilcox

5 posts in 802 days

06-04-2016 04:16 PM

Polyurethane is one of the most and common used one, I even used this for my outdoor furniture and still looks great, I applied it to this kind of furniture http://www.javateakoutdoorfurniture.com/products/occasional-tables/.

You must be signed in to reply.

DISCLAIMER: All views and comments posted by members are not necessarily those of HomeRefurbers.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

LumberJocks.com :: woodworking showcase