HomeRefurbers

fkwoodcnc's Blog

This blog is written by fkwoodcnc | 1 entry so far

Latest Entry

Sanding machine communication line and ground line burnout.

01-05-2019 04:49 PM by fkwoodcnc | 0 comments »

The cause of the burnout is caused by burning the earth wire. 1. Change the earth wire first. 2. Remove the neutral wire with the red mark. 3. Replace the two burnt communication wires. Last time we suggest that the earth wire must grounded well. Please check attached picture. We marked yellow is ground terminal block.On earth wire must be settled under the ground 1.5 meter with a metal bar.

Read this entry »

View fkwoodcnc's profile

fkwoodcnc

1 post in 75 days

View Blog Archive
Subscribe to blog entries (RSS)


By subscribing to the RSS feed you will be notified when new entries are posted on this blog.


DISCLAIMER: All views and comments posted by members are not necessarily those of HomeRefurbers.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

LumberJocks.com :: woodworking showcase