this is one of the best tools ive bought in many years . it comes with many different rubber profiles that you wrap sand paper on for sanding mouldings ect. it also has a grout cutter for removeing tiles . a scraper blade , a couple different saw blades , which is what i use it for most . i retrim around doors a lot and usually have to pull the baseboard on both sides and try not to break it after trimming recut the base and put it back . with this tool i only mark the baseboard in place and cut it . ive cut oak like its butter makes a nice cut and saves lots of time i have the blade thats in the pic plus a 3 in. round blade . another great thing is when its running you can put the blade on your hand and it will not cut you !
9 comments so far
tenontim
home | projects | blog
138 posts in 245 days
posted 232 days ago
Good post. I’ve never looked at these much, thought they were just a sander. I didn’t know they did all of that. I’ll have to look into it a little more.
-- Tim - http://www.tmuli.com
MRTRIM
home | projects | blog
505 posts in 246 days
posted 232 days ago
hi tim i also thought it nwas a sander . ive had it about 3 years and only used it to sand 1 time ! lol i use it a lot as a saw . the new models are even better . they have a quick release to change blades mine has an allen screw
AdMarkGuy
home | projects | blog
13 posts in 245 days
posted 232 days ago
Great info- I also did not know you could add a blade- thanks for posting
-- Bill -Ad Marketing Guy Ramsey NJ
MrWoody
home | projects | blog
7 posts in 246 days
posted 232 days ago
When I bought mine they didn’t have the sanding attachments, but I have them now.
Handiest tool I own for re-modeling work around the house.
boboswin
home | projects | blog
11 posts in 246 days
posted 232 days ago
I bought one a few years ago and I love it , I don’t know where all the power comes from.
The ultra thin blades just whistle thry wood plaster laminate etc a dn leave a clean edge.
I can remove grout with it without damaging the tile and yes , I can sand with it!
Cheers
Bob
Bill
home | projects | blog
113 posts in 246 days
posted 232 days ago
I saw this advertised sometime back, and thought it was an expensive hand tool. Now that you have some experience with it, length of use, etc, it may be time to look at it again.
It always looked great in the videos. Thanks MrT.
-- Bill - Turlock, Ca. - http://www.brookswoodworks.com
MRTRIM
home | projects | blog
505 posts in 246 days
posted 231 days ago
bill i usually discount the things i see in ifomercials . this one is certaily an exception . it has saved me so much time just in cutting moulding in place it long ago paid for itself
Jcees
home | projects | blog
27 posts in 244 days
posted 231 days ago
I’d heard about these from other trim guys. Nice to know there’s a tool that functions as designed and stands up to everyday use. Good review.
always,
J.C.
-- "Imagination is more important than knowledge" -- Albert Einstein
Joey
home | projects | blog
83 posts in 243 days
posted 222 days ago
My brother barrow mine a couple of years ago and I still haven’t gotten it back. I sure am glad you brought this to my attention…lol they are great tools I used them for cutting base and casing also. they are also great little sanders
-- Joey ~~ Sabina, Ohio http://sleepydogwoodworking.wordpress.com/