I worked on making new door trim moulding, well the bullnose trim anyways. The trim is just painted 1×4 MDF trim from the BORG. The bullnose trim is 1x pine that I planed down to 3/8” and then routed a bullnose profile. It is not much for detail but it matches the existing trim that was already in the house, so I thought it should stay as it was:
Here is the wall behind the stove that needed to be repaired, it had a big section of plaster that had cracked, came loose and had to be replaced. This is the first coat:
I hope to get the stove wall completed by the weekend, needs another coat of mud, a new baseboard moulding, which is already cut to length, just need to drill the hole in it for the gas line. Then wood putty the nail heads and seams, then sand all the putty down and apply the first coat of primer.